Nanosized Gd₂O₃:Eu³⁺ red phosphor is prepared using a template method from metal salt impregnated into a crystalline cellulose and is dispersed using a bead mill wet process. The driving force of the surface coating between Gd₂O₃:Eu³⁺ and mica is induced by the Coulomb force. The red phosphor nanosol is effectively coated on mica flakes by the electrostatic interaction between positively charged Gd₂O₃:Eu³⁺ and negatively charged mica above pH 6. To prepare Gd₂O₃:Eu³⁺-coated mica (Gd₂O₃:Eu/mica), the coating conditions are optimized, including the stirring temperature, pH, calcination temperature, and coating amount (wt%) of Gd₂O₃:Eu³⁺. In spite of the low luminescence of the Gd₂O₃:Eu/mica, the luminescent property is recovered after calcination above 600°C and is enhanced by increasing the Gd₂O₃:Eu³⁺ coating amount. The Gd₂O₃:Eu/mica is characterized using X-ray diffraction, field emission scanning electron microscopy, zeta potential measurements, and fluorescence spectrometer analysis.

Citations

Citations to this article as recorded by  

• Optimization of dispersed LaPO4:Tb nanosol and their photoluminescence properties
  Mahboob Ullah, Se-Min Ban, Dae-Sung Kim
  Optical Materials.2019; 97: 109366.     CrossRef

Ti alloys are extensively used in high-technology application because of their strength, oxidation resistance at high temperature. However, Ti alloys tend to be classified very difficult to cut material. In this paper, The powder synthesis, spark plasma sintering (SPS), bulk material properties such as electrical conductivity and thermal conductivity are systematically examined on Ti₂AlN and Ti₂AlC materials having most light-weight and oxidation resistance among the MAX phases. The bulk samples mainly consisted of Ti₂AlN and Ti₂AlC materials with density close to theoretical value were synthesized by a SPS method. Machining characteristics such as machining time, surface quality are analyzed with measurement of voltage and current waveform according to machining condition of micro-electrical discharge machining with micro-channel shape.

Citations

Citations to this article as recorded by  

• Comparative Study on Ablation Characteristics of Ti-6Al-4V Alloy and Ti₂AlN Bulks Irradiated by Femto-second Laser
  Ki Ha Hwang, Hua Feng Wu, Won Suk Choi, Sung Hak Cho, Myungchang Kang
  Journal of the Korean Society of Manufacturing Process Engineers.2019; 18(7): 90.     CrossRef

SKD11 (ASTM D2) tool steel is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium rich alloy carbide in the microstructure. SKD11 tool steel provides an effective combination of wear resistance and toughness, tool performance, price, and a wide variety of product forms. Adding of CNTs increased the performance of mechanical properties more. 1, 3 vol% CNTs was dispersed in SKD11 matrix by mechanical alloying. SKD11 carbon nanocomposite powder was sintered by spark plasma sintering process. FE-SEM, HR-TEM and Raman analysis were carried out for the SKD11 carbon nanocomposites.

Citations

Citations to this article as recorded by  

• Study on Effects of Mold Temperature on the Injection Molded Article
  J.-H. Han, Y.-C. Kim
  Archives of Metallurgy and Materials.2017; 62(2): 1271.     CrossRef

The optical film for light luminance improvement of back light unit that is used in light emitting diode/liquid crystal display and retro-reflective film is used as luminous sign consist of square and triangular pyramid structure pattern based on V-shape micro prism pattern. In this study, we analyzed machining characteristics of Cu-plated flat mold by shaping with diamond tool. First, cutting conditions were optimized as V-groove machining for the experiment of micro prism structure mold machining with prism pattern shape, cutting force and roughness. Second, the micro prism structure such as square and triangular pyramid pattern were machined by cross machining method with optimizing cutting conditions. Variation of Burr and chip shape were discussed by material properties and machining method.

Citations

Citations to this article as recorded by  

• Investigation of ultra-precision planing process to fabricate high luminance retroreflector based on cutting force and tool vibration analysis
  Ji-Young Jeong, Jun Sae Han, Chung-Mo Kang, Eun-Ji Gwak, Doo-Sun Choi, Tae-Jin Je
  Scientific Reports.2022;[Epub]     CrossRef
• Precision Cutting of the Molds of an Optical Functional Texture Film with a Triangular Pyramid Texture
  Huang Li, Zhilong Xu, Jun Pi, Fei Zhou
  Micromachines.2020; 11(3): 248.     CrossRef

In this study, ternary compound Max Phase Ti₂AlC material was mixed by 3D ball milling as a function of ball milling time. More than 99.5 wt% pure Ti₂AlC was synthesized by using spark plasma sintering method at 1000, 1100, 1200, and 1300°C for 60 min. The material characteristics of synthesized samples were examined with relative density, hardness, and electrical conductivity as a function of sintering temperature. The phase composition of bulk was identified by X-ray diffraction. On the basis of FE-SEM result, a terraced structures which consists of several laminated layers were observed. And Ti₂AlC bulk material obtained a vickers hardness of 5.1 GPa at the sintering temperature of 1100°C.

Citations

Citations to this article as recorded by  

• Synthesis and reaction path of Ti‐Al‐C MAX phases by reaction with Ti‐Al intermetallic compounds and TiC
  Hojun Lee, Si Yeon Kim, Young‐In Lee, Jongmin Byun
  Journal of the American Ceramic Society.2023; 106(12): 7230.     CrossRef